Mirror Pin Badge · Laser-Engraved Steel
Seven mirror bases, four shapes, 1-unit minimum.
MOQ from 1
- 1 - 10-$2.36
- 11 - 209%$2.14
- 21 - 5016%$1.99
- 51 - 99999919%$1.92
✱ Pick a shape first.
Mirror pin badges from Popecho are laser-engraved directly onto 304 stainless steel in a high-gloss mirror finish — your line art burns into the reflective surface as sharp, high-contrast marks against whichever mirror color you choose. That choice is yours at order time: black, gold, silver, blue, green, purple, or rose gold — and the color you pick becomes the background your design reads against. Four shapes are available, so silhouette is a decision too.
Specifications
| Spec | Value |
|---|---|
| Material | 304 stainless steel, mirror-finish lacquer |
| Shapes & Sizes | Oval 45×70 mm · Rectangle 20×70 mm · Circle 58×58 mm · Square 55×55 mm |
| Mirror Base Colors | Black, Gold, Silver, Blue, Green, Purple, Rose Gold |
| Print Method | Laser engraving over mirror surface |
| Hardware | Standard pin back |
| MOQ | 1 unit |
| Artwork Format | PNG, JPG, PSD — max 2 MB |
| Color Mode | RGB, 300 DPI |
File Prep
- Canvas size includes 2 mm bleed on all sides: Oval 54×54 mm · Rectangle 31×91 mm · Circle 63×63 mm · Square 60×60 mm
- Finished cut: Oval 45×70 mm · Rectangle 20×70 mm · Circle 58×58 mm · Square 55×55 mm
- Inside Popecho's editor, the die-cut outline and safe-zone overlay load automatically when you open your chosen shape variant
- Keep all critical art at least 2 mm inside the finished cut edge — the editor's safe-zone guide marks this boundary live
- Prepare artwork as high-contrast line art: solid lines and shapes only — no photographic gradients or halftones
- Un-engraved areas remain as the mirror base color; factor this into your design as the background tone
- Color mode: RGB · Resolution: 300 DPI
- Accepted formats: PNG, JPG, PSD · Max file size: 2 MB
FAQ
Q: What is the minimum order quantity?
A: MOQ is 1 unit — you can order a single mirror pin badge to test your design before scaling up.
Q: What file format do I need for a custom mirror pin badge?
A: Upload PNG, JPG, or PSD at 300 DPI in RGB color mode, keeping your file under 2 MB.
Q: Can I order samples or submit multiple designs in one order?
A: Each design goes through as a separate order; the 1-unit MOQ makes single-design sampling straightforward before you commit to a larger run.
Need help preparing artwork? Start with our tutorial: Mirror Badge Artwork Setup Guide
